Bricks and Blocks

How can you tell a cinder block from a concrete block?

Cinder blocks and concrete blocks look alike. Learn how weight, texture, colour and building age help you tell them apart, and why the difference may not matter.

On this page
  1. Short answer
  2. Why the names get mixed up
  3. Signs of an old cinder (clinker) block
  4. Signs of a modern concrete block
  5. Does it matter?
  6. Safety when cutting or drilling

Short answer

You usually tell them apart by weight, surface texture, colour and the age of the building. A true cinder block, made with coal cinders as the aggregate, tends to be lighter, rougher and darker than a modern concrete block made with sand and gravel or crushed stone. In practice, though, almost all blocks sold today as “cinder blocks” are really concrete blocks, so you can seldom be certain just by looking.

Why the names get mixed up

Both are concrete masonry units (CMUs). The difference is the aggregate:

  • Cinder blocks were made with cinders, the ash and clinker left over from burning coal. In the UK the equivalent was often called a breeze block, from furnace clinker called breeze.
  • Concrete blocks are made with sand, gravel, crushed stone or manufactured lightweight aggregates.

Industry bodies such as the Concrete Masonry & Hardscapes Association note that “cinder block” is still used in everyday speech for what are now concrete blocks. Many American and British sources say true cinder blocks were largely phased out around the middle of the 20th century, as other aggregates became available and standards developed. So today, “cinder block”, “breeze block” and “cement block” are mostly casual names for the same category of product.

Signs of an old cinder (clinker) block

None of these is conclusive on its own. Look for several together:

  • Age. The wall was built around or before the mid-20th century. Newer buildings are very unlikely to contain true cinder blocks.
  • Weight. The block feels noticeably light for its size, though modern lightweight concrete blocks can feel light too.
  • Texture. The face looks rough, porous or chalky, and you may see dark, glassy or ashy specks and small voids.
  • Colour. A darker or greyer tone than typical concrete, sometimes with a rust-coloured or blackish tinge.
  • Condition. Poor-quality old blocks may crumble at the corners or crush easily.

Signs of a modern concrete block

  • Weight. Dense, heavy and solid-feeling in the hand.
  • Surface. A tighter, more uniform surface, often with visible small stones or sand grains.
  • Sound. A firmer ring when tapped, where an old porous block sounds duller. This is a rough guide only.
  • Markings. Some blocks carry a manufacturer’s mark or strength class, or you may find a delivery note or markings on a pallet. In the UK, strength classes are explained in what 7N means in concrete blocks.

If you need to know the interior, drilling a small hole with a masonry bit can show whether the core is hollow or filled, but it will not reliably identify the aggregate. For genuine certainty about structural capacity, ask a structural engineer.

Does it matter?

For most DIY work, not much. The question that matters more is whether a block is suited to the job:

For how blocks compare with bricks, see brick vs concrete block: pros and cons.

Safety when cutting or drilling

Cutting, drilling or grinding any masonry creates fine dust that contains silica, which is harmful to breathe. Wet-cut where you can, work outdoors or ventilate well, and wear a suitable dust mask or respirator and eye protection. Old buildings and old paint can carry other hazards, so if you are unsure, get the materials tested or consult a professional before disturbing them.

The complete guide to bricks and blocks

Brick vs Concrete Block: Pros and Cons
Read the guide

Keep exploring

Guides from other topics

All topics →