Bricks and Blocks

Standard Brick Sizes: UK, US and Metric Dimensions Compared

Standard brick sizes compared: UK 215 x 102.5 x 65 mm, US modular and standard bricks in inches, and other metric sizes, with work vs coordinating size explained.

On this page
  1. Short answer
  2. Work size vs coordinating size
  3. UK and metric sizes
  4. US brick sizes
  5. Concrete block sizes for comparison
  6. Tips for matching bricks

Short answer

The standard UK brick has a work size of 215 x 102.5 x 65 mm (length x width x height). In the US, the common modular brick has an actual size of about 7-5/8 x 3-5/8 x 2-1/4 inches (roughly 194 x 92 x 57 mm). Sizes vary by country, brick type and manufacturer, so always check the product data sheet if you need to match or order exactly.

Work size vs coordinating size

Brick sizes are quoted in two ways, and mixing them up is a common mistake:

  • Work size (actual size) is the physical brick as manufactured.
  • Coordinating size (nominal size) is the brick plus one mortar joint. This is the size used to plan courses, openings and quantities.

For UK bricks, the coordinating size is 225 x 112.5 x 75 mm, which is the work size plus a 10 mm joint. For US modular bricks, the nominal size is 4 x 2-2/3 x 8 inches, which includes a joint of about 3/8 inch. Use the nominal size for planning, and the actual size for the brick itself. For quantity calculations, see how many bricks you need per square metre.

UK and metric sizes

Format Length x width x height (mm) Notes
UK standard metric brick (work size) 215 x 102.5 x 65 The common UK brick
UK coordinating size 225 x 112.5 x 75 Includes 10 mm joints, used for planning
Australia, standard 230 x 110 x 76 Common Australian size
India, modular 190 x 90 x 90 Nominal 200 x 100 x 100 with 10 mm joints
India, traditional About 230 x 114 x 76 Non-modular, often found in older work

Other European countries use their own formats, and older UK and imperial bricks can be slightly different from today’s metric ones. When repairing a historic wall, matching sizes (and joint widths) matters, so measure the old bricks and ask a specialist supplier.

US brick sizes

US brick names refer to nominal and actual sizes, and the actual size is usually about 3/8 inch smaller than the nominal in each direction to allow for the joint.

Name Actual (in, W x H x L) Nominal (in)
Modular 3-5/8 x 2-1/4 x 7-5/8 4 x 2-2/3 x 8
Standard 3-5/8 x 2-1/4 x 8 Varies with joint
Utility 3-5/8 x 3-5/8 x 11-5/8 4 x 4 x 12

Other names you may meet include Norman, Roman, King and Queen, and each manufacturer publishes its own list. Dimensions in this article are as commonly published, and tolerance and naming vary.

Concrete block sizes for comparison

Concrete blocks are much larger:

  • UK: 440 x 215 mm face, in 100, 140 or 215 mm widths. Three block courses (3 x 225 mm = 675 mm) line up with nine brick courses (9 x 75 mm = 675 mm), which is why UK blockwork and brickwork coordinate.
  • US: the standard concrete masonry unit is nominally 8 x 8 x 16 inches, with an actual size of about 7-5/8 x 7-5/8 x 15-5/8 inches.

For why you might choose one over the other, see brick vs concrete block: pros and cons. Clay and concrete bricks come in similar sizes, as covered in clay bricks vs concrete bricks.

Tips for matching bricks

  • Measure a few existing bricks and the joints between them, not just one.
  • Note the thickness (height) of the brick and the joint, not just the face.
  • Buy all bricks for a job from one batch if possible, and allow for waste.
  • If your measurements do not match any standard size, ask a specialist about reclaimed or made-to-order bricks.

The complete guide to bricks and blocks

Brick vs Concrete Block: Pros and Cons
Read the guide

Keep exploring

Guides from other topics

All topics →