Bricks and Blocks

Clay Bricks vs Concrete Bricks

What separates baked clay bricks from concrete (cement) bricks: how they are made, how they look and age, strength, moisture, cost and which to pick.

On this page
  1. The main difference
  2. How each type is made
  3. Comparison table
  4. Appearance and ageing
  5. Strength and durability
  6. Moisture, frost and efflorescence
  7. Cost
  8. Which should you choose?

The main difference

Clay bricks are made from clay or shale that is shaped and then fired in a kiln. Concrete bricks are made from cement, sand and aggregate that is moulded and left to cure, with no firing. Both are used in the same way, but they behave a little differently in appearance, weight, moisture and ageing.

How each type is made

Clay bricks. Clay is shaped (extruded, moulded or pressed), dried, and then fired at high temperature. Firing permanently changes the clay into a hard, ceramic material. The final colour depends on the clay, the minerals in it, and the firing conditions.

Concrete bricks. Cement, sand, aggregate and water are mixed, pressed or cast into moulds, and cured so the cement hardens. Pigment is often added to give colour. Because no kiln is needed, production can be simpler, which is one reason small-scale brick machines exist.

Note that cement and clay are different things. Cement is a manufactured binder, and clay is a natural material. “Cement brick” is just loose wording for a concrete brick.

Comparison table

Clay brick Concrete brick
Main materials Clay or shale Cement, sand, aggregate
Hardening Fired in a kiln Cured, not fired
Colour Natural, runs through the brick Usually pigmented, can be more uniform
Weight Often a little lighter Often a little heavier
Typical cost Varies, often higher for quality facings Often lower
Best known for Appearance and ageing Consistency and price

These are general trends. Individual products vary, so check the data sheet for any brick you are considering.

Appearance and ageing

Clay bricks are valued for rich, natural colours and for ageing gracefully. Concrete bricks can look uniform and clean, and come in a wide colour range, but pigments in some products may fade over time and the surface can look different from clay as it weathers. If you are matching an existing wall, a clay brick of similar colour and texture is usually easier to blend in, although matching old bricks of either type can be tricky.

Strength and durability

Both types can be strong enough for typical house walls and garden walls. Compressive strength varies by product rather than by material. The strongest bricks are generally engineering bricks, which are fired clay products designed for very high strength and low water absorption, used for things like damp-proof courses and below-ground work. Standard concrete bricks and facing clay bricks are generally adequate for normal walls, but for anything structural, use the strength class stated in the design.

For a wider look at masonry units, see brick vs concrete block: pros and cons.

Moisture, frost and efflorescence

All masonry absorbs some water. What matters is choosing a unit rated for where it will be used:

  • Look for a frost-resistance rating if the wall will be exposed, such as a free-standing garden wall, a wall top, or a brick retaining wall.
  • Efflorescence, a white powdery salt deposit, can appear on either clay or concrete units and usually fades with time. It is mostly cosmetic.
  • Clay and concrete differ in how they expand and contract, so avoid mixing them in the same wall unless the design allows for it.

Cost

Costs differ by brand, colour, region and quantity, so we do not quote figures here. As a rule, ordinary concrete bricks tend to be cheaper than quality facing clay bricks, while engineering bricks are priced as a specialist product. Ask suppliers for a price per thousand and compare like for like, including delivery.

Which should you choose?

  • Visible house or garden wall where appearance matters: clay facing bricks are a popular choice.
  • Budget project or a wall that will be rendered or painted: concrete bricks or blocks may suit better.
  • Wet, exposed or below-ground location: pick a unit with the right frost and water-absorption rating, which may mean engineering bricks.

Sizes are similar between the two, so quantity estimates work the same way. See standard brick sizes and how many bricks you need per square metre.

The complete guide to bricks and blocks

Brick vs Concrete Block: Pros and Cons
Read the guide

Keep exploring

Guides from other topics

All topics →