What efflorescence is
Efflorescence is the white, powdery or crusty deposit that sometimes appears on concrete, brick, block, stone and mortar. Water moves through the masonry, dissolves natural salts and carries them to the surface. When the water evaporates, it leaves the salts behind.
For efflorescence to occur, three things are needed: soluble salts, water, and a path for the water to travel to the surface. Remove any one and it stops.
Is it harmful?
Efflorescence itself is generally a cosmetic problem, and the salts are usually not a structural concern. But it is a sign that water is moving through the wall or slab. Persistent water can lead to other problems: spalling, mortar deterioration, peeling paint or coatings, and in basements, dampness. See repairing spalling concrete.
It’s worth telling it apart from other white stains. Efflorescence is usually dry and powdery and dissolves in water. A hard, crusty deposit that doesn’t dissolve may be calcium carbonate, which is harder to remove, and white fuzzy growth can be mold.
Fix the moisture source first
If you clean it off and the water keeps coming, it will come back. Check for:
- Gutters and downspouts that overflow or discharge against the wall.
- Soil or garden beds piled against the wall, or poor drainage.
- Leaking pipes, taps or irrigation.
- Cracked mortar joints or damaged copings and sills letting water in.
- Rising damp, or a lack of a damp-proof course in older buildings.
- Water pressure from the ground on a basement or retaining wall.
For new masonry, efflorescence often appears in the first months as construction moisture dries, and it can fade without treatment as the wall dries.
How to remove it
Start with the gentlest method and test any product on a small hidden area first.
- Dry brush. On a dry day, scrub the deposits off with a stiff, non-metal brush (a nylon or stiff bristle brush) and sweep or vacuum up the powder. This is often enough for light efflorescence. Avoid steel wire brushes on brick or stone, as they can leave rust marks.
- Wash with water. Scrub with a brush and clean water, working small areas at a time, and rinse. Avoid a lot of water on an already damp wall, because it can drive salts further in and bring them back. Don’t use a high-pressure washer on soft brick or old mortar, which can damage them.
- Use a masonry cleaner for stubborn deposits. Commercial efflorescence cleaners are available, and some people use diluted white vinegar for light deposits. Stronger options contain acids (such as muriatic/hydrochloric acid), which are hazardous. If you use any acid, dilute it exactly as the product directs, wet the wall first, apply to a small area, scrub, and rinse thoroughly with clean water. Wear eye protection, gloves and protective clothing, work in good ventilation, and never mix chemicals. Check that it’s safe for your type of masonry first.
- Rinse and let it dry. Rinse off all cleaner and let the wall dry completely.
- Check again. Wait a few weeks. If deposits return, the wall is still taking in water.
What not to do
- Don’t use acid on limestone, marble or other acid-sensitive stone, or on colored or sensitive mortar, and be cautious on glazed or painted surfaces. Always test first.
- Don’t skip pre-wetting the wall before an acid wash, because dry masonry soaks acid in deeply.
- Don’t seal over wet efflorescence. You can trap salts and moisture under the coating, causing it to peel.
- Don’t use a wire brush on soft brick, or a pressure washer on crumbling mortar.
- Don’t ignore the source of the water.
Sealing afterwards
Once the wall is clean, dry and the water source is fixed, a breathable penetrating masonry sealer may help reduce water absorption. Avoid film-forming coatings on walls that are damp from behind. See the downsides of sealing concrete. Repair cracked or missing mortar first (see how to repoint a brick wall). See patching a brick wall.
If it keeps returning
If efflorescence keeps coming back, the wall is probably continuing to take in or pass water. This is common on basement walls, retaining walls, and walls at ground level. Look into drainage, damp-proofing and waterproofing; for garden walls holding back soil, see whether a retaining wall needs drainage. See waterproofing basement and brick walls, and for crack-related water entry, shrinkage cracks in concrete block walls. A building professional can help if the cause isn’t obvious.