Short answer
Repair is usually cheaper up front. Replacing concrete means demolition, hauling away the old slab, preparing the base, new materials and finishing. A patch or crack repair involves a small fraction of that work.
But “cheaper” depends on how long the repair lasts. If the underlying problem isn’t fixed, repeated repairs can add up to more than one replacement. The cheapest option over time is the one that actually fixes the cause.
When repair is the cheaper choice
Repair tends to win when:
- Damage is localized, such as a few cracks, a spalled corner or a pitted patch.
- The concrete is structurally sound and well supported.
- The damage is mostly cosmetic or a minor safety issue, such as a small trip hazard.
- The surface is worn but the slab is otherwise good. A thin overlay can renew it. See can I resurface my concrete.
- You can do the work yourself with a suitable product. See what to patch concrete with.
When replacement is the better value
Replacement tends to make more sense when:
- Damage is widespread, with many cracks, broken pieces or crumbling throughout.
- The concrete is weak all the way through, not just at the surface.
- The slab has sunk or heaved because of bad ground, and lifting wouldn’t be reliable. See fixing a sunken concrete slab.
- Repairs keep failing.
- The repair would cost a significant proportion of the cost of a new slab. As a rough rule of thumb, many contractors suggest replacement is worth considering once repairs approach about half the cost of new, but this is a guideline, not a rule.
For a garage example, see repairing or replacing a damaged garage floor.
Costs to weigh
- Materials and labor. Repair products are cheap for small jobs; a contractor’s minimum call-out may dominate the cost.
- Demolition and disposal. Often a major part of a replacement bill.
- Base preparation and reinforcement. Replacement may involve base work that repair doesn’t; see how to lay a concrete slab for what a new slab involves.
- Appearance. Patches rarely match old concrete perfectly. If looks matter, a replacement or resurfacing may be better.
- Lifespan. A new slab may last decades, while a patch on a failing slab may not.
- Access and disruption. Replacement means days without use of the area.
- Permits and drainage. Some replacements need permits, or let you fix drainage that caused the damage.
Prices vary a lot between regions and contractors, so get actual quotes rather than relying on averages found online.
The middle option: resurfacing
If the slab is sound but ugly or rough, an overlay is often cheaper than replacement and lasts longer than patching alone. It doesn’t fix movement or structural problems. See can I resurface my concrete.
DIY vs. hiring
DIY patching, crack filling and small overlays are within reach for many homeowners, which saves labor costs. Lifting sunken slabs, structural cracks, and pours of any size are better left to professionals, since mistakes are expensive to undo. For cracks you aren’t sure about, see our guide to concrete cracks.
Getting quotes
Ask for quotes for both repair and replacement, with a written scope. Ask what caused the damage, whether the repair addresses it, what is guaranteed and for how long, and what the plan is for the old concrete. Compare like with like, with the same thickness, base work, reinforcement and finish, and ask whether the price covers removal and cleanup. A second opinion is reasonable for large jobs.
If spalling is your issue, see repairing spalling concrete for what is DIY-friendly.