Concrete Repair

What is the best thing to patch concrete with?

The best concrete patch depends on the damage. Compare vinyl-modified patches, repair mortars, epoxy and quick-setting cement, and learn how to choose and apply them.

On this page
  1. Short answer: match the patch to the damage
  2. Patch types at a glance
  3. How to choose
  4. Why patches fail
  5. Basic patching steps
  6. When a patch isn’t the answer

Short answer: match the patch to the damage

There isn’t one best patch for all concrete. The right product depends on how deep the damage is, where it is (floor, vertical wall, overhead, step edge), how much load or wear it gets, and the weather. Preparation matters at least as much as the product.

Patch types at a glance

Type Good for Notes
Vinyl- or polymer-modified patch (bagged, mix with water) Shallow chips, feather-edged repairs, small cracks, steps Easy to use. Can be thinned to a feather edge. Check the label for maximum depth.
Premixed acrylic or latex patch Shallow cracks and small spalls Ready to use, easy cleanup, limited depth.
Polymer-modified repair mortar Deeper holes, broken edges, structural-type repairs Often applied in lifts for thick sections. Look for low-shrink products.
Epoxy patch or mortar Heavy traffic areas, garage floors, bonding to hard surfaces Strong and chemical-resistant. Needs careful mixing, dry surfaces, and has a limited working time.
Quick-setting or hydraulic cement Urgent repairs, shaping broken edges, stopping small active leaks Sets in minutes, so work in small batches.
Flexible sealant or caulk-type crack filler Cracks that move, such as joints Doesn’t restore strength, but copes with movement.

Brands change and product lines are updated, so rely on the technical data sheet for what a particular product is rated for: maximum and minimum thickness, cure time, and whether it is suitable for interior, exterior or vertical use. People often recommend low-shrinkage cementitious repair mortars for lasting repairs. Reading reviews from tradespeople, as well as retailers, is worth the time.

How to choose

Ask yourself:

  1. How deep is the damage? Thin film products can’t fill a deep hole, and applying a thick layer of a thin-patch product tends to crack.
  2. Is it on a floor, wall or overhead? Vertical and overhead repairs need non-sag products.
  3. Will it carry traffic? Vehicle or heavy foot traffic favors stronger repair mortars or epoxies.
  4. Does the crack move? If so, choose a flexible product.
  5. Is it indoors or outside? Freeze-thaw, wet and sun exposure all matter.
  6. How quickly do you need it back in service? Fast-setting products trade working time for speed.
  7. Do you need it to match? Most patches are a different color from aged concrete.

Why patches fail

  • Dirt, oil or loose material left in the repair area.
  • Weak concrete left in place, so the patch peels with it.
  • Surface too dry or too wet for the product.
  • Too thick (or too thin) for the material.
  • Poor curing, especially in hot, dry or windy weather.
  • A moving crack, or a cause such as water or ground movement that hasn’t been fixed.

Basic patching steps

  1. Remove loose and crumbling concrete with a chisel or grinder until you reach sound concrete. Wear eye protection and a dust mask.
  2. Clean thoroughly. Remove oil and dust.
  3. Prepare the surface as the product directs: dampen, or apply a bonding primer.
  4. Mix only what you can place before it begins to set.
  5. Press the patch firmly into the area, working it into the edges, and finish to match the surrounding surface.
  6. Cure as directed, keeping it moist or protected if the instructions say so.

For more on specific damage, see repairing spalling concrete, repairing broken step edges, and our guide to concrete cracks.

When a patch isn’t the answer

If the damage covers the whole surface, an overlay may be better. See can I resurface my concrete. If the slab is broken up or has sunk, see repair or replace a garage floor.

The complete guide to concrete repair

Cracks in Concrete Slabs and Foundations: What's Acceptable and How to Fix Them
Read the guide

Keep exploring

Guides from other topics

All topics →