Start here · Essential guide
Mortar Mix Ratios for Bricks and Blocks
Mortar mix ratios for brick and block walls: UK cement-sand-plasticiser mixes, US Type M/S/N/O mixes, mixing tips and how to estimate cement.
Brick, Block and Render
Mortar mixes, joint thickness, brick bonds, footings, repointing and laying a straight first course.
Start here · Essential guide
Mortar mix ratios for brick and block walls: UK cement-sand-plasticiser mixes, US Type M/S/N/O mixes, mixing tips and how to estimate cement.
How long to cure a brick wall and how to do it: typical 7 to 10 day damp curing, hot and cold weather precautions, and when mortar reaches full strength.
Building sand (soft sand) is normally used for bricklaying mortar, while sharp sand suits concrete. Here is why, and when the two get mixed.
Footing depth for a brick wall depends on soil, frost and wall height. Learn the usual rules of thumb for garden walls and when to ask for advice.
How long to wait before laying bricks on a new concrete footing or slab: typical 1 to 3 day guidance, what affects it and how to check the base is ready.
Standard mortar joint thickness for brickwork is about 10 mm (3/8 inch). Learn why it matters, how to keep courses consistent and what goes wrong.
Step-by-step guide to laying the first course of bricks: dry laying to set out, building the corners, using a line and level, and fixing an uneven base.
Step-by-step repointing: when it is needed, tools, choosing a softer mortar, raking out joints, filling and tooling, plus dust safety and aftercare.
How to judge mortar consistency by sight and with simple trowel tests, the signs of a mix that is too wet or too dry, and how to fix each problem.
What cement mortar ratio to use for stone walls: typical cement-to-sand mixes for rubble and dressed stone, Type N vs S, and when to use lime.
Type N suits most above-ground brick and stone work, while Type S is the stronger choice below grade and for retaining walls. Here's how to choose.
How piers support a single skin (half-brick) wall: typical pier spacing, why height must be limited, footing basics and when to ask for engineering advice.
Learn the main brick bond patterns: stretcher, header, English, Flemish, garden wall and stack bond, plus which is strongest and when to use each.
Related topics