Bricks and Blocks

How Many Bricks Do You Need per Square Metre of Wall?

A UK standard brick wall needs about 60 bricks per square metre for a half-brick wall and about 120 for a one-brick wall. Learn how to calculate your own number.

On this page
  1. Short answer
  2. Quick reference
  3. How to calculate it
  4. Worked example
  5. What changes the number
  6. Allow for waste
  7. Imperial and US figures
  8. Blocks instead of bricks

Short answer

For standard UK bricks with 10 mm mortar joints, you need about 60 bricks per square metre for a single-thickness (half-brick) wall and about 120 bricks per square metre for a wall one brick thick. Other brick sizes and joint widths change the figure, and you should add roughly 5 to 10 percent for cuts and breakages.

Quick reference

Wall type Bricks per m² (approx.)
Half-brick wall (stretcher bond, one skin) About 60
One-brick-thick wall (two skins, or header bond) About 120
Standard UK concrete blocks (440 x 215 mm) About 10

Some sources quote ranges such as 48 to 60 per m² for a single skin, because of larger bricks or wider joints. Use the calculation below with your own brick size to get a reliable number.

How to calculate it

  1. Add the mortar joint thickness to the length and height of one brick. This gives the coordinating size.
  2. Multiply the two numbers (in metres) to get the area each brick covers, joint included.
  3. Divide 1 by that area to get bricks per square metre.
  4. Multiply by the total wall area, then add waste.

Worked example

A UK standard brick measures 215 x 102.5 x 65 mm. With a 10 mm joint, the coordinating face size is 225 x 75 mm.

  • Area per brick: 0.225 m x 0.075 m = 0.016875 m²
  • Bricks per m²: 1 ÷ 0.016875 ≈ 59

So roughly 60 bricks per square metre for a half-brick wall. For a one-brick-thick wall, double it to about 120, because there are two skins of bricks.

For a 5 m long by 2 m high wall (10 m²) built half-brick thick:

  • 10 m² x 60 = about 600 bricks
  • Add 5 to 10 percent for waste: roughly 630 to 660 bricks

Subtract openings such as doors and windows from the wall area before you multiply, but do not cut the waste allowance too fine.

What changes the number

  • Brick size. Larger bricks mean fewer per square metre. See standard brick sizes for the common UK, US and metric sizes.
  • Joint thickness. Wider joints mean fewer bricks. 10 mm is the usual UK figure, and US modular calculations usually assume about 3/8 inch.
  • Wall thickness and bond. A one-brick wall uses about double a half-brick wall, and some bonds use more units than plain stretcher bond.
  • Corners, piers and cuts. These add to the number.
  • Cavity walls. Only the brick leaf counts toward brick quantity. The inner leaf is usually blockwork.

Allow for waste

Allow about 5 to 10 percent extra for cuts, breakages, uneven edges and mistakes. Bricks vary from batch to batch in colour, so buy a little more than you think you need in one go, rather than topping up later. Also check how the merchant packs the bricks, since they are sold by the pack or per thousand.

Imperial and US figures

In the US, a modular brick has a nominal size of 4 x 2-2/3 x 8 inches, which works out at roughly 6.75 to 7 bricks per square foot of wall face. A “standard” or other brick size will differ a little, so check the supplier’s chart.

Blocks instead of bricks

Standard UK concrete blocks are 440 x 215 mm and, with a 10 mm joint, cover about 0.1 m², so you need about 10 per square metre. A US 8 x 8 x 16 inch block covers about 0.89 square feet with joints included, which is roughly 1.1 blocks per square foot. For the trade-offs of using blocks instead, see brick vs concrete block: pros and cons. For unit strength classes, see what 7N means in concrete blocks.

These are estimates for planning. Always confirm quantities with your supplier before ordering. For the mortar to go with them, see mortar mix ratios for bricks and blocks, which includes a cement estimate per 1,000 bricks.

The complete guide to bricks and blocks

Brick vs Concrete Block: Pros and Cons
Read the guide

Keep exploring

Guides from other topics

All topics →