Start with the type of wall
The right block depends less on the brand and more on what the wall has to do. Garden walls usually fall into one of three types:
- Free-standing walls, such as boundary or screen walls, only have to resist wind and knocks.
- Retaining walls hold back soil, and soil is heavy and often wet.
- Raised beds and low planters hold soil but are usually short.
Each has different needs, so decide which you are building before you choose a block.
Free-standing garden walls
For a free-standing wall, standard dense concrete blocks are the usual choice. In the UK, the common block is 440 x 215 mm, in 100, 140 or 215 mm thickness. Thicker blocks make a more stable wall, and a thin 100 mm wall can be wobbly at any height unless it has piers or is very low. In the US, the equivalent is the 8 x 8 x 16 inch nominal concrete masonry unit.
Points to consider:
- Dense rather than lightweight blocks. Lightweight and aerated blocks are generally unsuitable outdoors unless the maker says otherwise. See AAC and lightweight blocks vs standard concrete blocks.
- Frost resistance. Some blocks are not designed for wet, exposed conditions. Ask the supplier whether a block is suitable for external, freestanding use.
- Piers and movement joints. Long walls normally need piers or reinforcement for stability, and joints to allow for movement.
- Coping. A cap on top sheds water and protects the wall from the weather.
Hollow blocks can be reinforced and filled to improve stability, which is covered in whether you need to fill hollow concrete blocks.
Retaining walls
For a retaining wall, the best DIY choice is often interlocking or segmental retaining wall blocks (see how to build a concrete block retaining wall). These are made for the job, stack without mortar, usually have a lip or pins that set a slight backwards lean (batter), and are designed to be used with drainage and sometimes reinforcing grid.
Hollow concrete blocks can be used in a retaining wall too, but they are normally reinforced with steel and have the cores filled with concrete or grout, and they need proper footings and drainage. This is engineered work, not a casual weekend stack.
Which blocks suit a retaining wall?
- Low walls, typically up to about knee or waist height: interlocking retaining blocks installed per the maker’s instructions are a common DIY route.
- Taller walls, walls carrying slopes, driveways or buildings: get a structural or geotechnical engineer to design it. Tall retaining walls can fail dangerously, and many places require permission or design checks above a certain height.
Raised beds and planters
Standard concrete blocks and decorative landscape blocks both work for raised beds. They are cheap, durable and easy to stack. For safety questions about growing food next to concrete, see are concrete blocks safe for raised garden beds.
Block types compared
| Block type | Good for | Watch out for |
|---|---|---|
| Standard dense hollow block | Rendered or faced free-standing walls, reinforced walls | Plain look, needs finish, cores can collect water |
| Dense solid block | Sturdier free-standing walls, low retaining walls with design | Heavy |
| Interlocking retaining block | Dry-stacked retaining walls and planters | Follow the maker’s height and drainage rules |
| Decorative or split-face block | Visible garden walls and raised beds | Cost, matching colours between batches |
| AAC / lightweight block | Generally not for garden walls | Absorbs water, weaker outdoors |
Foundations, drainage and finishing
- Base. Walls need a firm, level base. Free-standing masonry walls generally sit on a concrete footing sized for the height, and below frost depth where frost is a concern. Retaining block systems usually specify a compacted gravel base instead.
- Drainage. For retaining walls, water behind the wall is the main enemy. Use free-draining gravel backfill and a drain pipe or weep holes as the design specifies.
- Mortar. Use mortar suited to external work, and follow the mixing guidance for it. For general strength classes, see what 7N means in concrete blocks.
- Finish. Render, paint, cladding or a brick or stone face can hide plain blocks. Compare the look and cost of bricks in brick vs concrete block: pros and cons.
Can you use quick-setting concrete mix with blocks? Bagged concrete or mortar mixes are often used to bed blocks or fill cores, but use a product designed for the purpose and follow its instructions.
Height, permits and when to get advice
Rules on garden wall and retaining wall heights differ by country and local authority. In the UK, for example, walls above a certain height, or beside a road, may need planning permission, but you should confirm with your local authority. In the US, many jurisdictions require permits or engineering for retaining walls above roughly 3 to 4 feet, though this varies. If a wall holds back soil near a building, a driveway or a boundary, or is taller than a low garden wall, get professional advice first.