Short answer
Sometimes. Whether a retaining wall needs a permit or planning permission depends on where you live, how tall the wall is, what it holds back and where it stands. Rules differ from country to country, state to state and even between neighbouring councils or municipalities, so this article can only describe what commonly triggers approval. The authority that decides is your local building department or planning authority, and the safest step is to ask them before you start.
This is general information, not legal or engineering advice.
What commonly triggers approval
- Height. Many places set a threshold above which a permit or an engineer’s design is required. In parts of the United States, 4 feet is a frequently cited height, often measured from the bottom of the footing to the top of the wall, though some jurisdictions use lower or higher figures. Some use lower limits near property lines. Always check how your authority measures height.
- Surcharge. A wall that supports a driveway, parking area, building, pool, or a slope above it may need approval or engineering even if it is low. See the planning guide for how to size up loads.
- Location. Walls near boundaries, streets, easements, utilities, water courses or in protected areas (conservation areas, floodplains, steep-slope or hillside zones) tend to be more tightly regulated.
- Changing drainage. A wall that redirects water onto a neighbour’s land may raise issues.
- Type of work. Some places treat retaining walls as structures under building codes and fences as separate items; a wall with a fence on top may need its combined height assessed.
Building permits in the United States
Many US municipalities require a building permit for retaining walls over a set height, or for any wall that supports a surcharge. A permit application can include a site plan, wall details, and, for taller walls, drawings stamped by a licensed engineer. Inspections may take place at several stages, such as the footing and drainage before backfill. Homeowners associations may also have their own approval rules in addition to the city’s.
Planning permission and building regulations in the UK
In England and similar systems, a distinction is often drawn between planning permission and building regulations. Small garden walls often fall under “permitted development” rules, which commonly include height limits for walls and fences (frequently quoted as 2 metres in general and 1 metre next to a highway, though exceptions apply). Retaining walls can bring in other issues: if the wall changes ground levels substantially, is on a listed building’s grounds or in a protected area, or if permitted development rights have been removed, permission may be needed. Building regulations can apply to structures where failure could affect safety. Because the details differ between England, Scotland, Wales and Northern Ireland, and between local authorities, confirm with your local council.
Engineering requirements
Even where a permit is not needed, an engineer’s design is a good idea for tall walls, walls on slopes, walls with surcharge, poor soils or sites with groundwater. Block and sleeper manufacturers also set height limits for DIY use, beyond which they require engineering. Height is the biggest lever: reducing it, for instance by building two lower, terraced walls with space between, can change which rules apply. If you terrace, check how your local authority treats terraced walls, as some count walls close together as a single structure.
Other approvals and checks
- Utilities. Call your local utility locating service before digging.
- Easements and boundaries. Check where the boundary is and whether the wall, its footing or its drain will cross it. A shared wall or a wall that affects a neighbour is worth discussing with them early.
- Drainage and water. Outlets should not discharge onto neighbouring land, and some areas control stormwater.
- Environmental rules. Near streams, wetlands, coasts or protected trees, additional permits may apply.
- Covenants and associations. Check your deeds or association rules.
How to find out
- Contact your city or county building department, or your local council planning department.
- Tell them the proposed height (measured as they define it), length, material, what the wall will hold back, and how close it is to boundaries.
- Ask whether a permit, engineer’s drawings and inspections are needed, and what the process and fees are.
- Get answers in writing if possible, and keep them.
Risks of skipping approval
Building without required approval can lead to a stop-work order, fines, a requirement to modify or remove the wall, or problems when you sell the property. A wall that fails can also cause damage and injury, and insurers may ask whether it was built properly. Where approval is not required, you are still responsible for a wall that is safe.
Once you know the rules, read on about concrete block walls, sleeper walls and drainage behind your wall.