Retaining Walls

What is the cheapest retaining wall to build?

The cheapest retaining wall depends on height and local materials. Compare salvaged stone, timber, small blocks and gabions, and where not to cut corners.

On this page
  1. Short answer
  2. Cheapest options compared
  3. Where cost really comes from
  4. Ways to keep cost down
  5. Where not to save money

Short answer

For a low wall, the cheapest approach is usually to build it yourself from materials you can get for little or nothing, such as salvaged or locally gathered stone, or from pressure-treated timber, which is commonly the cheapest new material. Small concrete retaining blocks are the next step up and generally last longer than timber. “Cheapest” depends on your wall height, your region, how much of the work you do yourself and how long you need the wall to last.

Cheapest options compared

Option Upfront cost Typical limits
Salvaged or local stone, brick or pavers Often very low in materials, high in labour Slow to build; needs skill to stay stable; see dry stone walls
Pressure-treated timber Low Usually suited to short walls (often quoted as up to about 3 to 4 feet); shorter lifespan, often cited as about 15 to 20 years or more depending on treatment and conditions
Small concrete retaining blocks Low to moderate Dry-stack assembly suits low garden walls; longer life than timber; see block walls
Gabion baskets Moderate; the stone fill adds cost Good for erosion control; cheap if stone is local; see gabion walls
Concrete sleepers Moderate to higher Cost per sleeper plus posts and footings; see concrete sleeper walls
Poured concrete or reinforced block Higher Strong, but needs formwork, rebar and labour; see formwork

Prices vary widely by region and over time, so get local quotes for materials rather than relying on a single national figure. Published installed prices for block walls are often quoted per square foot of wall face, and are much higher than the price of the blocks alone because they include base, drainage, backfill and labour.

You may also come across the idea of stacking bags of cement and wetting them. It is cheap, but the result is rough and can settle or deteriorate, so it is better suited to very low, non-critical uses than to a wall holding back anything significant.

Where cost really comes from

  • Height. Cost and risk rise faster than height. Reducing the height, for instance by grading the slope into two lower terraces, can reduce material, footing size and the need for engineering.
  • Labour. Hiring a contractor often adds more than the materials. Doing the digging and stacking yourself is where the most is saved.
  • Base, drainage and backfill. Stone, pipe and fabric are a real part of the budget even when the wall face is cheap.
  • Access. Hand-carrying heavy material is slow; delivery and machine hire can offset themselves.

Ways to keep cost down

  • Keep the wall low, ideally within the range where permits and engineering are not needed; see permits and planning permission.
  • Use local, salvaged or surplus material if you have the time.
  • Combine a low wall with grading and deep-rooted plants to share the job of holding soil.
  • Build it yourself, within your skill and safe limits.
  • Buy blocks in bulk and plan a layout that minimises cutting.

Where not to save money

A cheap wall that fails is the most expensive wall. Do not economise on:

For the whole picture, see the DIY retaining wall planning guide.

The complete guide to retaining walls

How to Build a Retaining Wall Yourself: Materials and Planning
Read the guide

Keep exploring

Guides from other topics

All topics →