Retaining Walls

Concrete Sleeper and Gravel Board Retaining Walls

How concrete sleeper retaining wall systems work, how to build one, how they compare with brick, and why fence gravel boards are a risky shortcut.

On this page
  1. What is a concrete sleeper retaining wall?
  2. System components
  3. Concrete sleepers vs brick vs timber
  4. Can concrete gravel boards be used as a retaining wall?
  5. Building a sleeper wall
  6. Drainage and backfill
  7. Cost and lifespan
  8. Slopes, slabs and landscaping in front
  9. Three types of retaining walls, and bulkheads

What is a concrete sleeper retaining wall?

A concrete sleeper wall is a post-and-panel system. Upright posts, usually steel H or I sections or concrete posts, are set in concrete footings. Precast concrete sleepers, which are rectangular panels, slot or stack between the posts to form the face. The posts carry the load; the sleepers span between them and hold the soil.

The system is popular because the parts are standardised, delivered cut to size and reasonably quick to assemble. It also gives a straight, clean, modern face. Sleepers are typically rated for particular spans and heights, so follow the supplier’s design tables.

System components

  • Posts, with embedment depth and spacing set by the wall height and loads.
  • Footings of concrete around each post.
  • Sleepers that slot between posts, usually stacked from the base upward.
  • Drainage: gravel and a drain pipe behind the wall.
  • Geotextile against the back of the sleepers where gaps could let fines wash through.
  • Capping, where desired, for a finished top.

Concrete sleepers vs brick vs timber

Concrete sleepers Brick Timber sleepers
Speed Fast with the right equipment Slow Fast
Skill Moderate High Low to moderate
Weight Heavy; usually needs two people or a machine Individual bricks are light Moderate
Durability Long; not susceptible to rot Long Shorter, depends on treatment
Appearance Clean, industrial Traditional Natural

Brick or sleepers? For tall or long straight runs where speed matters, sleepers are often the simpler choice. Brick suits shorter walls where appearance and matching existing masonry matter; see brick retaining wall specifications.

Can concrete gravel boards be used as a retaining wall?

Gravel boards are the thin concrete panels used at the bottom of a fence to keep timber panels off the ground. They are made to resist some soil contact, not to hold back a sustained load of earth. Some people use them as makeshift sleepers between posts. This can seem to work for a very low raised bed or a short change in level, but:

  • they are usually much thinner than retaining sleepers and may crack under load;
  • fence posts are rarely set deep enough to resist soil pressure;
  • wet soil adds considerable weight.

If the soil is more than a few inches deep, or there is any slope, surcharge or boundary issue, use proper retaining sleepers and posts. Where a gravel board and fence share a wall, the fence is also at risk.

What goes between concrete and a wood post? Where timber meets concrete, a gap, a damp-proof membrane or a post base that keeps wood off wet concrete helps prevent rot. Using steel or concrete posts avoids the issue.

Building a sleeper wall

  1. Check height, loads and permissions. Walls above certain heights usually need design input; see permits and planning permission.
  2. Mark the line and excavate for the post footings and the base of the wall.
  3. Set the posts. Dig holes to the depth the supplier’s tables call for, set the posts plumb and in line, and concrete them in. Let the concrete cure before loading.
  4. Fit the first sleeper. Slot it in at or below ground level on a compacted base.
  5. Stack the remaining sleepers, checking level as you go, and fit them from the front.
  6. Add drainage. Place a perforated pipe along the base, wrapped drainage stone behind the wall, and an outlet. Details are in what to backfill behind a retaining wall.
  7. Backfill in layers with granular material.

Drainage and backfill

Does a 600mm retaining wall need drainage? Generally yes in some form, even at that height; see our guide on drainage for a 600mm wall. Sleeper walls have gaps and, with the right backfill and fabric, can drain through the joints, but a base drain is still good practice.

Cost and lifespan

Costs depend on region, height, and whether you hire a machine and installer. Concrete sleepers are generally priced per sleeper by length, and posts and footings add to the total. For cheaper options at low heights, see the cheapest retaining wall to build.

Concrete does not rot, so the life of the wall is generally decades, limited more by post corrosion, movement and drainage than by the sleepers. Steel posts are commonly galvanised for this reason.

Slopes, slabs and landscaping in front

  • On a slope: step the wall in sections or terrace it, with posts set to follow the design rather than the ground surface.
  • On top of a concrete slab: a slab does not automatically make a good footing. Check that it is thick enough and sound, and that post connection is designed.
  • Landscaping in front: keep plants and paving clear of the footing, leave the drain outlet accessible and avoid raising ground in front of the weep area.

Three types of retaining walls, and bulkheads

Retaining walls are often grouped as gravity walls (rely on mass), cantilever walls (reinforced stem and base) and anchored or reinforced-soil walls (tied back). Sleeper walls usually work as cantilevered post walls. A bulkhead is a retaining wall at a waterfront, where it holds back soil against water. For wider planning, see the DIY retaining wall guide.

The complete guide to retaining walls

How to Build a Retaining Wall Yourself: Materials and Planning
Read the guide

Keep exploring

Guides from other topics

All topics →