Render, Screed and Finishes

Best Paint for Roughcast Walls and Concrete Pool Decks

How to choose paint for roughcast and pebble-dash walls and for concrete pool decks: paint types, preparation, finish, slip resistance and what lasts longest.

On this page
  1. Painting roughcast and pebble-dash walls
  2. Painting a concrete pool deck
  3. What lasts longest?
  4. How to read reviews

Brand rankings go out of date quickly, and many “best paint” lists are hard to verify, so this guide focuses on the paint types and the preparation that matter most. Check current manufacturer data sheets before you buy.

Painting roughcast and pebble-dash walls

Roughcast and pebble dash are textured renders with stones or coarse aggregate. You can paint them, and many people do to freshen or unify the colour.

What to look for

  • Masonry paint. Choose a paint made for exterior masonry, normally acrylic or similar, that resists weather and alkali.
  • Textured or smooth. Textured masonry paints have fine grit and can help bridge hairline cracks and hide small flaws. Smooth masonry paints give a cleaner look but follow the wall’s profile.
  • Breathability. Walls absorb and release moisture. A paint that traps water can blister and peel, so choose a paint described as breathable or water vapour permeable, especially on older or damp-prone walls.
  • Finish. A matt or low-sheen finish generally hides imperfections better than a gloss, which highlights them. On a heavily textured wall, shadows from the texture already hide much of it.

Preparation

  1. Check for loose or hollow render. Tap it and repair or remove it, since paint will not hold it on. See how to repair cracks in render.
  2. Wash off algae, moss and dirt, and treat growth with a suitable fungicidal wash.
  3. Brush away loose, chalky material. If the surface is powdery, a stabilising or fixing primer is often recommended.
  4. Fill cracks with a suitable exterior filler.
  5. Apply masonry paint in dry weather, with a long-pile roller, a stiff brush for the texture, or a sprayer. Two coats are normal.

Damp walls

Paint is not a cure for damp. Find and fix the cause first, such as a leaking gutter, bridged damp course or high ground level. Then use a breathable masonry paint. A paint that seals in moisture can make the problem worse.

Painting a concrete pool deck

You can paint a concrete pool deck, but the surface faces foot traffic, pool chemicals, water and strong sun, so the coating and prep matter.

Types of coating to compare

  • Acrylic concrete or pool deck paint. Easier to apply and recoat, usually the DIY choice. Durability depends on the product and the preparation.
  • Epoxy and polyurethane or polyaspartic systems. Often tougher, but some epoxies can chalk or fade in strong sunlight, and many involve more demanding application. Some are best left to professionals.
  • Cementitious deck coatings. Thin cement-based toppings that are sprayed or troweled on. See spray deck vs cool deck.

What to look for

  • Product rated for pool decks, wet areas or exterior concrete.
  • Slip resistance, either built in or by adding an anti-slip additive according to the instructions.
  • Light colours generally stay cooler underfoot than dark ones.
  • Compatibility with your concrete: new concrete often needs to cure and dry before coating, and sealed or previously painted concrete may need stripping or etching.

Preparation

Clean thoroughly, remove oil, grease, old sealer and loose paint, repair cracks, and let the slab dry. Follow the manufacturer’s instructions for etching or priming.

What lasts longest?

Generally, tougher two-part systems (such as epoxy or polyurethane types) are marketed as the longest lasting, but results depend on preparation, sun exposure and use. A well-prepared surface under a mid-range paint often outlasts a premium paint on a poor surface. Recoating is normal maintenance on outdoor concrete.

How to read reviews

Look for reviews from people who have used the product for several seasons, not just on the day of application. Check what surface and climate they used it on, whether they prepared the surface as directed, and what the manufacturer says about recoat intervals.

For more on the walls these paints go onto, see rendering and plastering walls.

The complete guide to render, screed and finishes

Rendering and Plastering Walls: Mix Ratios, Application and Curing
Read the guide

Keep exploring

Guides from other topics

All topics →