The short answer
As a rough guide, a 20 kg bag of dry render covers somewhere around 1 square metre at a thickness of about 10 mm. Thicker coats cover less, and thinner coats cover more. Products differ in density, so the figure on the bag or data sheet is the one to trust. Treat anything here as an estimate.
How coverage is worked out
Coverage depends on the volume of wet render a bag produces and the thickness you apply it.
- Coverage in m² ≈ yield of the bag in litres ÷ thickness in mm.
- Yield varies with the product, but 20 kg of dry render often gives somewhere around 10 to 13 litres of applied material.
For example, with a yield of 12 litres:
| Thickness | Approximate coverage per 20 kg bag |
|---|---|
| 6 mm | about 2 m² |
| 10 mm | about 1.2 m² |
| 15 mm | about 0.8 m² |
| 20 mm | about 0.6 m² |
Your product’s yield may be different, so use these only as a sanity check.
Why real coverage is usually lower
The calculation above assumes a perfectly flat wall and no waste. In practice you will use more because of:
- uneven brick or block, which needs thicker coats to flatten;
- waste on the board, the trowel and the mixing bucket;
- reveals, corners, beads and areas around openings;
- multi-coat systems, where each coat needs its own material;
- the thickness needed to cover mesh or deep mortar joints.
Many people add 10 to 15 per cent to the estimate. For a wall with big dips, allow more.
Estimating a whole wall
- Measure the area of the wall in square metres and subtract large windows and doors.
- Work out the total coat thickness for the system you are using. Check the data sheet.
- Divide the area by the bag’s coverage at that thickness and round up.
- Add an allowance for waste.
If you mix your own render from cement and sand, work from volumes instead, as in rendering and plastering walls: mix ratios, application and curing. A bag of bagged render is premixed, so the instructions on the bag take priority over any ratio.
If you find that the render cracks after drying, thickness and mix are two of the usual suspects. See how to repair cracks in render.