Render, Screed and Finishes

Can You Render Over Painted Brick or Painted Masonry?

Rendering over painted brick is risky because paint blocks suction and key. See when it can work, how to prepare the wall, and the options if paint is in the way.

On this page
  1. The short answer
  2. Why paint is a problem
  3. Check the paint first
  4. Your options
  5. Do a test patch
  6. General render steps

The short answer

It is generally not recommended to apply cement render directly onto painted brick. Paint can block the brick’s natural suction and leave a smooth surface, so the render may not bond and can later sound hollow or fall off. In some cases it can be done if the paint is removed or the wall is prepared with a suitable bonding system or mechanically fixed mesh. Always follow the render manufacturer’s guidance for your product.

Why paint is a problem

Cement render relies on two things to hold on: a key (a rough surface to grip) and suction (the brick drawing a little water from the mix). Paint, particularly modern masonry paint and gloss finishes, can seal the pores and smooth the surface. The result is a weak interface between the render and the wall. The same issue appears with mortar; see why mortar won’t stick to brick.

Check the paint first

  • Is it well bonded? Scrape with a knife. If it flakes off in sheets, it needs to be removed.
  • What type is it? Old cement-based or mineral paints and limewash are different from acrylic and gloss coatings. Some are more compatible with render than others.
  • Is the wall otherwise sound? Paint over damp, crumbling or salt-contaminated brick will not help, and rendering over it traps the problem.

Your options

  1. Remove the paint. This is the most reliable option. Methods include wire brushing, mechanical grinding, chemical strippers designed for masonry, or specialist blasting. Take care with dust, and be aware that old paint may contain lead, so find out before you sand or grind it.
  2. Use a bonding coat. Some manufacturers offer bonding primers or spatterdash-type coats for difficult surfaces. Follow the product’s guidance on whether it is suitable for painted masonry.
  3. Fix render mesh or lath. Mechanically fixing a mesh to the wall gives the render something to grip, independent of the painted surface. This is a common route when the paint cannot be removed, but the fixings, lath type and render system should be specified properly.
  4. Don’t render. If the issue is just appearance, repainting with a suitable masonry paint may be easier. See best paint for roughcast walls and concrete.

Do a test patch

Whatever method you choose, try a small test area. Let it cure and see how well it bonds. Tapping it and checking for hollow sounds after the curing period is a useful early warning.

General render steps

Once the wall is prepared, the usual steps apply: dampen if the substrate is absorbent, apply a scratch coat, then the finish coat, and cure. Our guide to rendering and plastering walls walks through the mix and the method. If cracks appear afterward, see how to repair cracks in render.

The complete guide to render, screed and finishes

Rendering and Plastering Walls: Mix Ratios, Application and Curing
Read the guide

Keep exploring

Guides from other topics

All topics →