What wall screeding means
The word “screed” is used for two jobs. For floors, a screed is the level layer of sand and cement laid on a slab. For walls, “screeding” generally means applying a thin layer of cement-based or similar material to smooth and even out a surface, usually before painting or another finish. Painters in some regions use the term to describe skim-coating a wall, and others use it for a thin sand and cement coat on masonry.
Because the term is used loosely, check with a contractor what they mean before you agree on a quote.
Why it matters
A wall surface that is uneven, patched or rough will show through paint, especially in side light. Screeding helps by:
- filling small holes, hollows and rough textures;
- giving a more uniform surface so paint takes evenly;
- covering minor cracks and patchy repairs;
- providing a consistent base for decorative finishes.
It does not fix structural problems, damp or serious movement cracks. Those need to be dealt with first. If the wall is cracked, see how to repair cracks in render, which has a useful triage between cosmetic and more serious cracks.
Is screeding the same as plastering?
Not exactly. Plastering normally refers to applying a thicker base layer, often in coats, which builds up and levels the wall. Screeding or skimming is typically a thinner coat to smooth and finish. The two can overlap, and some people use the terms for the same task, but the thickness and purpose are usually different. For the thicker, multi-coat process, see rendering and plastering walls.
What do they use for screeding?
It depends on the wall and the region:
- a cement and fine sand mix for masonry walls, often with a bonding or plasticising additive;
- ready-mixed or powder skim and finishing plasters for interior walls;
- cement-based wall fillers or smoothing compounds, sometimes with polymer content for better adhesion;
- on very smooth or sealed surfaces, a bonding primer before the coat.
Follow the product’s data sheet for surface preparation, thickness and drying time.
Do professional painters sand walls before painting?
Often, yes. Sanding removes ridges, trowel marks and dust nibs and gives paint a better key. It is usually done after the screed or filler has dried and before priming. Wear a dust mask, and wipe or brush off dust before painting.
Common mistakes
- Screeding over dusty, loose or damp surfaces, which can lead to peeling.
- Applying coats too thick, which can crack on drying.
- Skipping a primer or sealer where the product requires one.
- Painting before the screed has dried fully.
- Ignoring the cause of damp or cracks.
The same bond problems that affect mortar apply here. If your coat will not hold, see why mortar won’t stick to brick.