The short answer
Both are thin, cement-based surface coatings applied over concrete around a pool, but they are not the same thing. “Cool deck” (and the trade name Kool Deck) refers to cementitious toppings designed to stay cooler underfoot than bare concrete. “Spray deck” is a broader, looser term for spray-applied textured overlays, which can be cement-based or acrylic-modified and come in many colours and patterns. Because the terms are used loosely by sellers and installers, check the product data sheet for what you are actually getting.
What is cool deck?
Cool deck coatings are cement-based and typically light in colour. They are formulated to reflect heat and feel cooler on bare feet in sun. Different manufacturers use different formulations, and some are sold under brand names. They are generally applied in a thin layer and finished with a texture that gives some grip when wet.
What is spray deck?
Spray deck generally means a thin overlay that is sprayed on and then often knocked down or trowelled to a texture. Many are polymer-modified cement or acrylic-based systems and can be coloured or stamped to look like stone or other finishes. The heat-reflecting performance depends on the product and the colour, so do not assume a spray deck will be as cool as a product marketed as cool deck.
Comparing the two
| Point | Cool deck | Spray deck |
|---|---|---|
| What it is | Cementitious heat-reflective topping, often a trade name | Broad term for spray-applied textured overlays |
| Surface temperature | Designed to be cooler than bare concrete | Varies by product and colour |
| Appearance | Usually light, with a limited colour range | Often a wide colour and pattern choice |
| Application | Often installed by trained applicators | Many options, from professional to DIY kits |
Treat this table as a general pattern, not a rule for every brand.
Cracking and the base concrete
Neither coating fixes a cracked slab. Cracks in the concrete beneath can reflect through a thin overlay, and a forum discussion of premature cracking on both types is typical of what owners report. Repair cracks properly and make sure the slab is sound, clean and free of coatings before overlaying. If you are repairing cracks in cementitious surfaces, see how to repair cracks in render for the general approach.
Can you do it yourself?
Some products are sold for homeowner use and others only through trained applicators. Preparation, mixing, weather and application technique all affect the result, and mistakes are hard to undo. Check whether the manufacturer supports DIY installation, and keep in mind that a warranty may depend on a certified installer.
Can you paint a concrete pool deck instead?
Yes, with a coating designed for it. Paint is cheaper but generally thinner and usually needs more frequent recoating. See best paint for roughcast walls and concrete pool decks for the types and prep.
Choosing
Look at how hot the deck gets in your climate, the slab’s condition, your budget and whether you want a plain or decorative finish. Ask for samples, local examples that are several years old, and the manufacturer’s data sheet.