Short answer
Usually not, at least upfront. Plain poured concrete is generally the cheaper option to install, while concrete pavers cost more in materials and labour. That gap narrows when the concrete is decorative (stamped, coloured or exposed aggregate), and pavers can work out better value over time because repairs are simpler. Prices vary a lot by region and by project, so treat any figure as a rough guide and get local quotes.
Upfront cost
Cost guides often quote US installed prices in ranges like these:
- Plain or brushed concrete: roughly $5 to $15 per square foot.
- Stamped or coloured concrete: often higher, roughly $12 to $25 per square foot.
- Pavers: commonly around $14 to $30 per square foot, and more for specialist materials or complex patterns.
These come from contractor and cost-guide sources and are not precise. Prices change over time and between areas, and your own quotes may differ.
DIY costs: materials vs labour
If you are doing the work yourself, the picture shifts, since labour is the largest part of a professional quote.
- Poured concrete is cheap in materials but unforgiving. You need formwork, a well-prepared base, finishing skills, control joints and proper curing. Mistakes are hard to fix, and a large pour usually needs ready-mix delivery or several helpers.
- Pavers cost more per square metre in materials, but you can work in small sections at your own pace, and mistakes are easy to correct by lifting and relaying. The effort is mostly in digging, compacting and levelling. See interlocking concrete pavers.
Both need a properly prepared base, so that cost does not disappear whichever you choose. See how deep the sub-base should be for a patio.
Long-term costs and repairs
Concrete can crack with ground movement, frost or heavy loads. A cracked slab is difficult to repair invisibly, and a patch often shows. Pavers are individual units, so a settled or stained one can usually be lifted and replaced. On the other hand, pavers can need joint sand topped up from time to time, and weeds can grow in the joints. Concrete may need sealing every so often. Maintenance costs differ, but neither is maintenance-free.
Installation time
Pouring concrete can be quick, with a modest patio poured in a day, but it must cure for days before heavy use. Pavers take longer to lay, but can generally be used once the joints are filled and compacted. Cold or wet weather can stop a concrete pour, while pavers are more tolerant, though they still need dry conditions for polymeric sand.
Drainage and climate
Poured concrete is not permeable, so it needs a fall to shed water. See what slope a patio should have for drainage. Paved surfaces with open joints, and permeable paver systems, let some water pass through into the base, which can help in wet areas.
Which to choose
- Choose poured concrete if upfront cost and speed matter most, the surface is plain, and you or your contractor are comfortable with the finishing.
- Choose pavers if you want design flexibility, easier repairs, and the ability to build in stages as a DIY project.
For slab-based paving, which sits somewhere in between, see our mortar mix guide for laying patio slabs.